On materials flow using different lubricants in upsetting process
AbstractPurpose - In many industrial processes, friction and lubrication have major advantages and are key during the metal forming process. Upset forging is a process which increases the diameter of...
View ArticleSynthesis of a Long Chain Alkylbiphenyl Base Stock and Study on the...
AbstractPurpose - The Friedel-Crafts alkylation of biphenyl with 1-octene was completed using methanesulfonic acid (MSA) as catalyst. Design/methodology/approach - Single factor experiments were...
View ArticleMicrostructure and tribological properties of gas tungsten arc clad TiC...
AbstractPurpose - Because of poor wear resistance; carbon steels have limited industrial applications as tribological components. This work evaluated the wear performance of carbon steel cladded with...
View ArticleWear Behaviour of PMMA against 316L Stainless Steel under Dry and Lubricated...
AbstractPurpose - Polymethylmethacrylate (PMMA) is commonly used in low stress sliding application against metal. The effects of applied load and frequency on the wear rate of PMMA against 316L...
View ArticleOptimization of dry sliding wear conditions for AlSi10Mg/SiCp Composites...
AbstractPurpose - The purpose of this research paper is to find the optimum parameters namely the sliding speed, applied load and percentage of SiCp under which AlSi10Mg/SiCp composites experience...
View ArticleAnalysis of tilting pad thrust bearing static instability and lubrication...
AbstractPurpose - The purpose of this paper is to analyze the problems of tilting pad thrust bearing static instability and lubrication performance under the static...
View ArticleTribological properties of carbon nanotube grease
AbstractPurpose - The purpose of this paper is to prepare the carbon nanotube grease; to contrast the tribology properties of the carbon nanotube grease with the original grease, and to find the...
View ArticleSliding Wear Characteristics of Grey Cast Iron as Affected by the Type and...
AbstractPurpose - The objective of the present study is to assess the influence of the volume fraction solid lubricants like talc lead and graphite in oil separately as well as in combination towards...
View Article
